Hi, welcome to use Simatop Smart Outdoor Garden Light 1. Download “SMART LIFE” APP Scan the QR code for installation. Or Search free App“SMART LIFE” from App Store for iOS version or Google play store for Android version. 2. Follow below wiring instruction to connect the device.
Parameter： Input voltage：DC 9V~12V Maximum power：144W WiFi standard：Wi-Fi 2.4GHz 802.1.1b/g/n Security type：WEP/WPA-PSK/WPA2-PSK Operating Environment：0℃~70℃,≤80%RH Shell Material：PC 3. Add device to your APP Please make sure the WiFi RGBWoutdoor light and your smart phone covered by same Wifi router. A. Easy mode >>Power up the light after complete installation .Make sure the Red light rapidly blink.
>>Click the “Confirm indicator rapidly Blink” , search WiFi router and type in password and click“Confirm” .
Once the configuration is completed, the white light will stop flickering.
B. AP mode >> Hold the power button of RGBW switch controller for 5 seconds when the light rapidly blink, until the light is flashing slowly, now the device enters hot spot configuration mode(AP mode).
>>Click “Connect now”, connect to the WiFi “SmartLife-xxxx”. Then, back to the APP. Once the configuration is completed, the white light will stop flickering. 4. Connect to Alexa A. Sign in Alexa in “Smart Life” App. B. Enable Smart Life Skills in your Alexa App ‐‐ Search “Smart Life”. C. Enable the Smart Life Skills. D. Input the user name and password you previously used to register in the App. E. Confirmation page will be shown when your Alexa account is linked with your Smart Life account. F.
5. Control the Smart socket through Alexa A. You can control the RGB WiFi light strips with a simple voice command like: ”Alexa, turn on the light” or “Alexa, turn off the light”. B. The name of the device should be the same as you set up in Smart Life App. 6. Quick Guide of Using Google Home to Control Smart Devices. A. What you need to get started Before using Google Home to control your devices, make sure you meet the following conditions.
You can also search "Smart Life" in either App Store or Google Play to install the app. B‐II. Register a Smart Life account and sign in the app (Refer to App Instruction) Open the Smart Life app, tap "Register" to register an account, then sign in the app. B‐III. Add device and change device's name (Refer to App Instruction) Sign in with the Smart Life account, add the device, then change device name to a easily recognized word or phrase, like "bedroom light". C.
C‐II. Find "Smart Life" in the list. In the new window, select your Smart Life account’s region, type your Smart Life account and password, then tap "Link Now". After you assign rooms for devices, your devices will be listed in the Home Control page. D. Control your smart devices through Google Home Now you can control your smart devices through Google Home. Take bedroom light as the example, the supported voice commands are as below: Ok Google, turn on/off bedroom light.
D. What devices can I control with the Smart socket? You can control lights, fans, humidifiers, portable heaters, and any small home appliances. Warning: 1.Please check if there is damage caused by transportation, if yes, please contact supplier for replacement. 2.Please follow the specification instruction and notice to keep products in a good and safe use condition. 3.Put the power adapter in proper condition and out of reach of the children. 4.
RF Exposure Statement To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body.
