Contents 1 Safety Warnings Safety Warning Environment Protection Attention 2 Your Bluetooth Speaker Product Specifications 3 Operating Instructions 4 Technical Parameters 5 Remarks Bluetooth versions 6 Fault/remedy No Electric Power No Sound Bluetooth Connection Problem No Reaction 7 Environmet of speaker working Humiture demand Without fire and liquid
1. Safety Warnings Safety Instruction (1) Read the safety warning carefully and only use the product as described in these instructions to avoid accidental injury or damage. (2) Pls keep these instructions for future reference. (3) If you pass this product on to someone else, remember to give them these instructions. (4) Do not use this product near the water, it’s not water-proof. Pls use a clean cotton cloth to clean the machine.
the battery well to protect the environment and avoid the harm to human being. Never open the battery by yourself, unless under the professional worker’s help and instructions.
Operating Instructions (1)VOL+/Driving plate,the volume controller (2)Line in Audio input line with 3.5mm (3)Charging Charging through Micro USB and the supply power is DC5V/1A (4)Bluetooth Connect After the power on,the bluetooth device is default setting,the light is flashing before connect,after connected the light change blue . 5 Remarks the bluetooth versions is 2.1+EDR 6 Fault / Remedy (1)No Electric Power Pls make sure the speaker is connected to a USB port on your computer or the mains adapter.
3. After connection, the sound turns to worse. PLS check the battery and if metal barriers resist or not. 4. The connection of bluetooth and the device not good Pls get the speaker closer or remove all barriers. 5.Speaker cannot be connected. The speaker did not support the system your Bluetooth device, your Bluetooth software is lower the standard it needed.
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
