Operation Manual

High Frequency Integrated RFID Reader Operation Manual Guangdong Sygole Intelligent Technology Co.,Ltd
SG-HT-243
75 mm
SG-HT-243M
50 mm
SG-HT-244
50 mm
SG-HT-263
85 mm
SG-HT-263M
55 mm
SG-HT-264
100 mm
SG-HT-268
110 mm
SG-HT-524M
--
6. Networking Application
Sygole I series products support multiple communication modes. During networking
application, the user may select a suitable communication mode according to the practical
application conditions. Generally speaking, the hardware topology graph for application is as
shown in the following figure:
6.1 Field bus communication mode
In some cases, the field bus communication mode should be adopted to meet such application
requirements for large amount of RFID reader heads and high data timeliness. Sygole I series
products can support the field bus through gateway controller, and support such protocols as
ProfiNet, EtherCAT, Ethernet/IP, DeviceNet, CCLINK and MODBUS TCP. Specifically, readers
are connected to the gateways which are mutually connected in series. In this way, all readers can
be connected to the same network. Specifically, the networking mode is as follows: