User's Manual

In GPS mode (when the indicator is
constant), hold the return to home, so the
aircraft will return to its take-off position
automatically. During the return flight, you
can use the joystick to control the aircraft
ascend, descend and move left/right in
order to avoid obstacles. To terminate the
return flight, hold the return to home
button.
If the remote control signal is lost for
more than 20 seconds, the aircraft will
automatically return to the take-off
position. If the signal is restored during
the return flight, you can hold the return to
home button to terminate the return flight.

!
No signal
Automatic return
due to loss of signal
Photo and video recording gestures cannot be used when the bottom
camera is on.
The camera may accidentally take a photo or start a video recording if
there are surrounding objects that resemble the or gestures.
If there is no memory card in the aircraft, photos and video recordings will
be saved to your phone.
If there is a memory card inserted in the aircraft, photos and video
recordings will be saved to the memory card and your phone.
The aircraft supports memory cards with a capacity of up to 64 GB.
If the aircraft is flying at an altitude less than 20 m, it will automatically ascend to
an altitude of 20 m before returning home.
If the aircraft is flying at an altitude more than 20 m, it will return home at the
same altitude.
The aircraft cannot automatically avoid obstacles during the return flight.
The automatic return to home function is not available when the GPS signal is
weak (flashing indicator).
If the aircraft does not receive a GPS signal and lost contact with the remote
control for more than 20 seconds, it will not be able to return to home but will land
automatically.
Return to home function
English