User's Manual

ManualsBrandsGUANGDONG TAKSTAR ELECTRONIC ManualsAudio EquipmentWireless Microphone

前言

产品特性

包装清单

尊敬的用户：

感谢您选购得胜V4无线摄像麦克风，为了您能够更好的了解使用本产品，建议您在使用

前仔细阅读本说明书。

若存在有疑问或者您有宝贵的建议，可通过拨打得胜官方服务热线

400 6828 333或微信扫描二维码关注得胜官方公众号与我们联系。

通过苹果MFi官方认证，安全无忧，无惧ios生态系统升级，升级无忧放心使用；

三合一万能转接，领夹式配戴，机身小巧便携，适用于摄像机、单反及手机等设备；

2.4G无线传输技术，传输信号稳定，有效距离为120米；

实时监听，三个监听音量等级自由切换；

降噪算法拾音，三种降噪模式自由切换，满足任何复杂环境下的精确拾音；

支持TF卡本地音频存储，无惧音频文件数据丢失，让采访更安全；

麦克风可单独当作录音笔使用，任何环境下随时随地录音同步保存；

配备充电收纳盒，发射端和接收端收纳及充电更方便；

收纳盒大电池2000mAh可循环充电，出行旅游直播采访首选．

接收端3.5mm摄像机模式下、麦克风工作模式下可支持连续采访12小时超长续航，不再受续航时间困扰；

专为直播、VLOG、摄像、采访等场合

收纳盒（一拖二） 1个

麦克风发射器 2个

三合一接收器 1个

音频线

1根

充电线

1根

防风毛套 2个

耳机 1对

说明书 1本

Foreword

Features

Applications

Packing List

Dear user：

Thank you for choosing our V4 dual wireless camera microphone. In order to better understand the use of this product, it is

recommended that you read this manual carefully before use.

If you have any questions or suggestions, please contact our local dealer.

Original lightning connector, no more worry about IOS ecosystem, and safe to use.

Three-in-one universal receiver, lavalier design, compact and convenient.

2.4G wireless transmission technology, stable transmission distance can be up to 120 meters.

Real-time monitoring, free switching of three volume levels.

Three noise reduction modes can be switched freely, to meet accurate pickup in any complex environment.

Support TF card local audio storage, no more worry about file loss.

The microphone can be used as a recording pen alone, and the recording can be saved synchronously anytime and

anywhere in any environment.

Equipped with a charging case, the transmitter and receiver are more convenient to store and charge; interviews.

The charging case has a large battery of 2000mAh that can be recharged, which is the first choice for travel and make

a Live.

Microphone and receiver with 3.5 mm cable which is used for camera can last 12 hours continuous interviews.

Live, Vlog, Video-shooting, Interview and others.

Charging case(two mic and one receiver)

1PCS

Microphone transmitter

2PCS

3 in 1 Receiver 1PCS

Audio cable

1PCS

Charging cable

1PCS

Furry windscreen 2PCS

Earphone 1PCS

User manual 1PCS

技术参数功能示意

注：以上数据由得胜实验室测试得到，并拥有最终解释权！

收纳盒参数

麦克风参数

接收端参数

频率范围:2.4GHz

频响范围:20-20KHz

充电时间:约80分钟

输入电压:DC4.8~5.4V

工作时间:12小时

电池容量:230mAh

延迟时间:25ms

频率范围:2.4GHz

频响范围:20-20KHz

输入电压:DC4.8~5.4V

电池容量:230mAh

延迟时间:25ms

灵敏度:-26 dBFS

信噪比:64dB

充电时间:约80分钟

接收端重量:约18.7克

工作时间:12小时

输入电压:DC4.8~5.4V 电池容量:2000mAh

充电时间:约90分钟

收纳盒重量:约128.2克

麦克风尺寸:49.25*20.9*20.56mm

接收端尺寸:53.4.*43.63*22.09mm

纳盒尺寸:111.2*79.5*34.4mm

续航时间:支持接收端和发射端充电3次

麦克风重量:约8.2克

Charging case

1. 充电仓指示灯

2. 充电仓TYPE-C充电接口

3. 3.5mm转接线插口

4. 接收端3.5mm监听接口

5. 接收端TYPE-C

6. 开机/复位键

7. 降噪等级/音量循环键

8. 接收端指示灯

9. 接收端Lightning

10. 开关/静音键 *2

11. 发射器指示灯 *2

12. 发射器复位键 *2

13. TF存储卡槽 *2

12.Reset key on the transmitter *2

发射端功能说明摄像机连接使用说明

设备连接使用说明

单独使用麦克风/录音笔使用时

麦克风无TF时的指示灯

当麦克风有TF卡时，TF卡录音

发生故障时的指示灯

单击开机按键切换开始录音/停止录音（自动保存）

无法录入TF卡

录音蓝灯慢闪，静音绿灯慢闪

蓝灯常亮

绿灯常亮

绿灯亮一秒

灯光指示操作/现象

状态

序号

绿灯慢闪

蓝灯常亮

低于3.3V电压(15分钟内自动关机)

低于3.3V关机或者无连接状态超10分钟

红绿灯快闪

红灯快闪

绿灯常亮

灯灭

静音：绿灯快闪

拾音：绿灯常亮

充电：充电仓对应亮绿/蓝灯

充满：对应的绿/蓝灯灭

连接成功自动进入TF卡录音模式

放入充电仓内关闭盖子

开机

关机

搜索配对

配对成功

清除配对

静音/拾音

充电

充电中：红灯常亮

已充满：收纳盒灯灭

插入充电线充电收纳盒

充电中：绿灯、蓝灯闪烁

已充满：绿灯、蓝灯灭

发射端放入收纳盒并关闭盖子多个发射端同时充电

充电中：白灯闪烁

已充满：白灯灭

接收端放入收纳盒并关闭盖子接收端充电

充电中：绿灯、蓝灯、白灯交替闪

已充满：对应灯灭

发射端与接收端放入收纳盒并关闭盖子多设备同时充电

指示灯绿灯常亮

3.5mm连接线

指示灯绿灯常亮

注：TF卡录音每次自己动保存新的录音文件，当内存内容满后，自动删除最早时间的录音文件。

取出设备后，接收端和发射端麦克风指示灯绿灯常亮，即配对连接成功。（如图所示）

将3.5mm连接线分别插入接收端与相机3.5孔设备，接收端绿灯常亮。即可使用麦克风收音。

手机连接使用说明

将Lightning接收端/Type-C接收端插入手机的Lightning接口/Type-C接口设备，接收端绿灯常亮，即可使用麦克风收音。

绿灯亮10秒

蓝灯亮10秒

红灯闪烁

打开盖子/指示灯：100%-75%

打开盖子/指示灯：74%-36%

打开盖子/指示灯：35%-13%

收纳盒电量指示灯

充电中：充电仓白灯常亮

已充满：充电仓白灯灭

放入充电仓内关闭盖子

充电

低电

低于3.3V电压(15分钟内自动关机)

单击开机按键切换静音/拾音

静音:暂停录音

拾音:开始录音

红灯快闪

静音：绿灯快闪

拾音：绿灯常亮

低电

静音/拾音

低于3.3V关机或者超过15分钟灯灭自动关机

单击“+ -”循环键

三个等级依次循环

提示音依次为：

“嘟”（一级）

“嘟嘟”（二级）

“嘟嘟嘟”（三级）

指示灯依次为：

红灯闪一次（一级）

红灯闪二次（二级）

红灯闪三次（三级）

监听音量等级切换

双击“+ -”循环键

提示音依次为：

“咚”（一级）

“咚咚”（二级）

“咚咚咚”（三级）

指示灯依次为：

绿灯闪一次（一级）

绿灯闪二次（二级）

绿灯闪三次（三级）

降噪等级切换

自动关机

TF卡自动录音模式

拾音：开始录音

静音：暂停录音

单击开机按键切换静音/拾音

开机后10秒内三击开机按键

连接成功

无连接对象

1、放入收纳盒内并关盖

2、长按开机按键3秒

1、收纳盒开盖并取出发射端

2、单击开机按键

绿灯常亮

绿灯亮一秒

灯光指示操作/现象

状态

序号

灯光指示操作/现象

状态

序号

绿灯慢闪

红绿灯快闪

开机

关机

搜索配对

配对成功

清除配对

连接成功

无连接对象

1、放入收纳盒内并关盖

2、长按开机按键3秒

1、充电仓开盖并拿出接收端

2、单击开机按键

接收端功能说明收纳盒功能说明

开机后10秒内三击开机电源键

Windows笔记本系统操作

台式Windows系统操作

点击电脑左下方“Windows”图标后选择弹窗页面的“声音”设置选项然后点击页面的“声音输出”选项后选择“扬声器”确认；

最后再在下方选择“声音输入”选项，选择“麦克风”选项确认即可使用。

接收端安装相机说明

安装到相机之前，将接收器的背夹与接收器之间产生一定的空间后，将接收器推入相面靴座卡口固定。

毛套安装说明安全警示

关于本说明书

关于图标含义解释

将毛套塑料扣位对准发射端凹槽，插入再顺时针旋转90°即可固定。

根据RL2004/108/EG和European Low Voltage Directive(欧洲低电压指令）RL2006/95/EG的测试结果表明，

本产品符合欧共体关于电磁兼容性的成员国法律整合的指令中所规定的限值。

此符号表示，根据WEEE指令（2012/19/EU）和国家法律，由于这种类型的废弃物会有潜在的有害物质，可能

对环境和人类健康产生负面影响，所以本产品不应该与您的家庭垃圾一起处置，应该将本产品应交由授权的电气

和电子设备（WEEE）回收站回收。同时，您在正确处理本产品的同将有助于自然资源的有效利用。如需了解更

多有关您可以在何处放置废物回收设备的信息，请联系您当地的城市办事处、废物管理局或家庭废物处理服务部门。

未经合规主明确批准的变更或修改可能会使用户失去操作设备的权限。此设备符合FCC规则第15条部分的要求。

操作须符合以下两个条件：

（1）此设备可能不会造成有害干扰；

（2）此设备必须接受接收到的任何干扰，包括可能导致意外操作的干扰。

向下插入顺时针旋转90°

接收端开机插3.5mm转接线至机箱的音频输入口后点击电脑左下方“Windows”图标后选择弹窗页面的“声音”设置选项然后

点击页面的“声音输出”选项后选择“扬声器”确认；最后再在下方选择“声音输入”选项，选择“麦克风”选项确认即可使用。

APPLE笔记本系统操作

在APPLE电脑上选择“设置”选项后再点击“声音”设置选项然后选择“声音输出”选项点击选择“扬声器”外放后确认；再

选择“声音输入”选项后点击选择“麦克风Wireless microphone”点击确认即可使用。

OTG连接开启(仅限安卓系统）

设置

其他设置

最近任务管理

备份与恢复

还原手机

Google

OTG连接

10分钟未使用，将自动关闭。

存储空间

日期和时间

键盘与输入法

截屏

屏幕录制

第一步

进入设置页面

以OPPO A72为例

搜索设置项

定制专属于你的ColorOS

飞行模式

SIM 卡与流量管理

WLAN 关闭

未连接蓝牙

管理“云服务”、“查找手机”、登录设备等

用户01641280831

第二步

进入其他设置

第三步

点击OTG连接

18 19

为避免电击、高温、着火、辐射、爆炸、机械危险以及使用不当等可能造成的人身伤害或财产损失,使用本产品前,请仔细

阅读并遵守以下事项:

1.使用产品时请确认所连接设备与本产品功率是否匹配以及合理调整设备音量大小，不要在超过产品功率及大音量下长时间使

用，以免造成产品异常;

⒉使用中若发现有异常（如冒烟、异味等)，请立即关闭电源开关并拨掉电源插头，然后将产品送经销商检修;

3.本产品及附件都应放置在室内干燥通风处，勿长期存放在潮湿、灰尘多的环境，使用中避免靠近火源，雨淋、进水、过度碰

撞、抛掷、振动本机及覆盖通风孔，避免损坏其功能;

4.使用该产品时需遵守相关安全规定，法律法规明确禁止使用场合请勿使用产品，以免导致意外事故;

5.请不要自行拆机改装或维修，以防止出现人身伤害，如有问题或服务需求请联系当地经销商跟进处理。

本说明书中内容符合截止印刷之日的技术规格。由于得胜公司会不断改进产品，本说明书可能不符合您的特定产品的技术

规格。要获取最新版说明书，请访问得胜官网，然后下载说明书文件。技术规格、设备或另售的附件在各个地区可能有所不同，

如有问题请与当地得胜经销商确认。

如需更多支持和深层产品信息，请浏览得胜官方网站: https://www.takstar.com/

Battery: 230mAh

Working time: 12 hrs

Charging time : about 80 mins

Weight: about 18.7g

Battery: 230mAh

Working time: 12 hrs

Charging time : about 80 mins

Weight: about 8.2g

S/N Ratio: 64 dB

Input voltage: DC 4.8V~5.4V

Charging time: 90 mins

Weight: about 128.2g

Battery capacity: 2000 mAh

Recharge times: recharge 3 times for microphone and receiver

Charging case size: 111.2*79.5*34.4mm

Frequency: 2.4GHz

Latency: 25 ms

Frequency response range: 20-20KHz

DC: 4.8~5.4V

Sensitivity: -26 dBFS

Microphone size: 49.25*20.9*20.56mm

Microphone specification

Receiver specification

Frequency: 2.4GHz

Latency: 25 ms

Frequency response range: 20-20KHz

DC: 4.8~5.4V

Microphone size: 53.4.*43.63*22.09mm

Note: The above data are measured by Takstar laboratory, and Takstar has the final interpretation right!

7.Volume/noise key

6.Power /reset button

FunctionsSpecifications

2.Type-C charging port

3.3.5mm monitoring port

1.Charging case indicator light

4.3.5 mm adapter cable port

5.Type-C receiver

10.Power /Mute key *2

8.Indicator light on the receiver

9.Lightning receiver

13.TF memory card slot *2

11.Indicator light on the microphone *2

No. State

Operation

Light

Power on

Power off

Paired

1.Open the charging case and take out the microphone

2.Click the power button

1.Put it in the charging case and close the cover

2.Press power button for 3 secs

Green light for one second

Green light flashes slowly

Green light is always on

Mute: the green light flashes quickly

Pick-up: Green light is always on

Charging: Blue light flashes

Fully charged: Blue light off

Red light flashes quickly

Red and green light flashes quickly

Search for pairing

Connection succeeded

Mute: stop recording

Pick-up: start recording

Put it in the charging case and close the cover

Below 3.3 V voltage

Light offBelow 3.3V or no connection for over 15 minutes

No pairing object

Clear pairing/re-pairing

Three-click the power button within 10 secs after power on

Mute/pick-up

Charging

Low power

Automatic power-off

Green light is always on

After the connection is successful, it will automatically

enter the TF card recording mode.

TF card automatic Recording

Blue light flashes slowly when recording

and green light flashes slowly when

stopping recording

Click the power button to switch to start recording /

stop recording (auto save the file)

Use the microphone as a recorder alone

（no pair with receiver）

Blue light is always on

Recording fails

when the microphone has no TF card

The microphone has a TF card but the TF card

is damaged

Click the power button to switch mute/pick-up

1.Open the charging case and take out the receiver

2.Click the power button

1.Put it in the charging case and close the cover

2.Press power button for 3 secs

No pairing object

Connection succeeded

Three-click the power button within 10 secs after power on

Green light for one second

Green light flashes slowly

Green light is always on

Charging: white light flashes

Fully charged: white light off

Red and green light flashes quickly

No. State

Operation

Light

Power on

Power off

Paired

Search for pairing

Clear pairing/re-pairing

Charging

Pick-up: start recording

Mute: stop recording

Put it in the charging case and close the cover

Microphone transmitter functions

Receiver functions

Charging with Type-C cable

Open the case/indicator light:74%-36%

Open the case/indicator light:100%-75%

Open the case/indicator light:35%-13%

Charging: red light is always on

Fully charged: the light is off

Charging: the green, blue light flashes

Charging: white light flashes

Fully charged: white light is off

Charging: White, blue and green light

flashes alternately in turn

Fully charged: corresponding lights are off

Charge the case

Charge two transmitters Put two transmitters in the case and close the cover

Put the receiver in the case and close the cover

Put two transmitters and receiver in the case

and close the cover

Charge the receiver

Charge multiple device

Battery level indicator

of charging case

Volume level switch Click the volume key

Noise reduction level

switch

Double click the noise key

The prompt tone are as follows:

"Dong" (Level 1)

"Dong Dong" (Level 2)

"Dong Dong Dong" (Level 3)

Light

Note: The TF card will automatically save a new recording file every time. When the capacity of the memory card is full, the oldest recording file will

be automatically deleted.

The three levels are cycled in turn

The prompt tone are as follows:

"Beep" (Level 1)

"Beep" "Beep" (Level 2)

"Beep" "Beep" "Beep" (Level 3)

The indicator lights are as follows:

Red light flashes once (level 1)

Red light flashes twice (level 2)

Red light flashes three times (level 3)

The indicator lights are as follows:

Green light flashes once (level 1)

Green light flashes twice ( level 2)

Green light flashes three times (level 3)

Charging case specification

No. Operation

State

Connection instruction

After taking out the device, the indicator lights of the microphones on the receiver and transmitter are always green, it is

paired successful.（See as below picture）

Green light is always on

Mobile phone connection instruction

Plug the Lightning receiver/Type-C receiver into the Lightning port/Type-C port of the mobile phone, and the green light of

the receiver is always on, and the microphone can be used to pick up sound.

Green light is always on

Plug the 3.5mm cable into the receiver and the 3.5mm hole of the camera respectively, the green light of the receiver is

always on, and the microphone can be used to pick up sound.

Camera connection instructions

Green light is always on

3.5mm cable

Windows Notebook Operation

Turn on the receiver and connect the TPYE-C port to the TPYE-C jack of the computer, or insert the 3.5 adapter cable to the

audio input jack, click the "Speaker" icon at the bottom right of the computer, and then open the sound settings, "Sound"

setting option and then click the bottom of the page to select "Voice Input" option, select the corresponding "Microphone"

option to confirm.

Turn on the receiver, plug in the 3.5mm adapter cable to the audio input port of the host computer, click the "Speaker" icon at

the bottom right of the computer, and then open the sound settings, the "Sound" setting option, and then click the "Sound

Input" option at the bottom of the page, and select the corresponding "Microphone" option to confirm.

Desktop Windows operation

Turn on the receiver and connect the TPYE-C port to the TPYE-C socket of the MacBook. On the MacBook, select the

"Settings" option, then click the "Sound" , then select the "Sound output" option, click to select "Speaker", and then confirm;

then select the "Sound input" option, click to select "Microphone -Wireless microphone" ，Click Confirm to use.

MacBook operation

Take OPPO A72 model as an example

Turn on OTG (only for Android system)

Step 1:

Enter the setting page

Step 2:

Enter other setting

Step 3:

Click ti connect

Settings

Your ColorOS,your styte

Manage HeyTap cloud, Find my Phone, sign-in

devices, and more

User 01641280831

Airplane mode

SIM card & mobile data

Wi-Fi

Bluetooth

Not connected

WM-GC

Additional settings

Storage

Date & time

Keyboard & input method

Screenshot

Screen recording

Task management at present

Reset Phone

Back up & restore

Google

OTG connection

Automatically turn o when not in use for 10 minutes.

Before installing to the camera, use the receiver’s back clip to clip on the camera shoe and then fix.

Instructions for installing the receiver to the camera

Align the plastic buckle of the furry windscreen with the groove of the transmitter , insert it and then rotate 90° clockwise

to fix it.

Furry windscreen installation instruction

Rotate 90°clockwiseInsert down

Label Meanings

According to the test results obtained based on RL2004/108/EG (Electro magnetic Compatibility Directive) and

RL2006/95/EG (Low Voltage Directive), this product complies with the limits specified in the European Community

EMC (Electromagnetic Compatibility) Directive, an integration of relevant laws from its member states.

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

(1) this device may not cause harmful interference, and

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to

operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(2) this device must accept any interference received, including interference that may cause undesired operation.

This symbol indicates that,according to WEEE (Waste of Electrical and Electronic Equipment)Directive(2012/19/EU)

and national laws, this type of waste should not be discarded along with your household waste,as it contains

potentially hazardous substances that may pose a negative impact on the environment and human health. It should

be handed over to an authorized WEEE collection facility for recovery and recycle. Herewith you will be helping

effective utilization of natural resources.For more information on disposal of WEEE products, please contact your

local municipality, waste management bureau or household waste disposal service.

Safety Instructions

To avoid electric shock, overheat, fire, radiation, explosion, mechanical risk and injury or property loss due to improper use,

please read and observe the following items before use:

1.Please check if the power of the connected equipment matches with that of this product before operation.Adjust the volume

to proper level during operation.Do not operate at over-power or high-volume level for extended time to avoid product

malfunction or hearing impairment.

2.If there is any abnormality during use (e.g., smoke,strange odor),please kill the power switch and unplug from power source,

then send the product to the local dealer for repair.

3.Keep this product and its accessories in a dry and ventilated area.Do not store in a humid or dusty area for extended time.

Keep away from fire, rain, liquid intrusion,bumping, throwing,vibrating,or from blocking any ventilation openings, to prevent

malfunction.

4.Please abide by safety rules during operation.Do not use the product in places prohibited by laws or regulations to avoid

accident.

5.Do not disassemble or repair the product by yourself to avoid injury. If you have any questions or require any services,

please contact our local dealer.

This manual contains up-to-date technical specifications as of printing.However specifications contained herein may not

conform to your particular product since Takstar is constantly improving its products.For the latest version/more information

please visit our website: https://www.takstar.com/.

Specifications, devices or accessories available may vary from region to region.If you have any questions,please contact

our local dealer.

About This Manual

Low power

Below 3.3 V voltage

Red light flashes quickly

Automatic power-off Below 3.3V or no connection for over 15 minutes Light off

Green light is on for 10 secs

Blue light is on for 10 secs

Red light flashes

Fully charged: corresponding lights are off

Mute: the green light flashes quickly

Pick-up: Green light is always on

Mute/pick-up

Pick-up: start recording

Mute: stop recording

Click the power button to switch mute/pick-up

Address: Dinggang, No.5 Team, Xialiao Village,

Longxi Town, Boluo County, Huizhou City,

Guangdong, China

地址：广东省惠州市博罗县龙溪镇下寮村第五组位于顶岗

Summary of content (1 pages)

PAGE 1
前言技术参数尊敬的用户：发射端功能说明功能示意序号收纳盒参数感谢您选购得胜V4无线摄像麦克风，为了您能够更好的了解使用本产品，建议您在使用前仔细阅读本说明书。输入电压:DC4.8~5.4V 若存在有疑问或者您有宝贵的建议，可通过拨打得胜官方服务热线关机 2 续航时间:支持接收端和发射端充电3次充电时间:约90分钟操作/现象 1、收纳盒开盖并取出发射端 2、单击开机按键状态开机 1 电池容量:2000mAh 400 6828 333或微信扫描二维码关注得胜官方公众号与我们联系。收纳盒重量:约128.2克纳盒尺寸:111.2*79.5*34.4mm 产品特性通过苹果MFi官方认证，安全无忧，无惧ios生态系统升级，升级无忧放心使用；麦克风参数三合一万能转接，领夹式配戴，机身小巧便携，适用于摄像机、单反及手机等设备； 2.4G无线传输技术，传输信号稳定，有效距离为120米； Features Real-time monitoring, free switching of three volume levels.