User's Manual

ManualsBrandsGuangdong Transtek Medical Electronics ManualsElectronicsBluetooth Body Fat Analyzer

16 17

Fat is essential for human body. It can not only store energy and protect viscera, but also

regulate body temperature and maintain normal physiological function of human body.

However, too much body fat is harmful to human body. It is always accompanied by Fatty

Liver, diabetes, coronary heart disease, etc.

Therefore self-measuring and self-monitoring body fat level are beneficial to your health.

Since we can’t judge body fat level simply by our weight, this body fat analyzer LS208-B6,

with BIA (Bio-impedance Analysis) technology applied, is an accurate device that offers a

quick and comfortable way to obtain your body fat level.

Appendix Appendix

EMC Guidance

Health Tips - About Body Fat

Table 1 – Guidance and

MANUFACTURER

’

declaration –

ELECTROMAGNETIC EMISSIONS

for all

ME EQUIPMENT

and

ME SYSTEMS

Guidance and manufacturer’s declaration

– electromagnetic emissions

The device is intended for use in the electromagnetic environment specified below.

The customer or the user of the device should assure that it is used in such an

environment.

Emissions test Compliance Electromagnetic environment-guidance

RF emissions

CISPR 11

RF emissions

CISPR 11

Harmonic emissions

IEC 61000-3-2

Voltage fluctuations/

flicker emissions

IEC 61000-3-3

Group 1

Class B

Not applicable

The device must emit electromagnetic

energy in order to perform its intended

function. Nearby electronic equipment may be

affected.

1. MEDICAL ELECTRICAL EQUIPMENT needs special precautions regarding EMC and

needs to be installed and put into service according to the EMC information provided in

the ACCOMPANYING DOCUMENTS.

2. Wireless communications equipment such as wireless home network devices, mobile

phones, cordless telephones and their base stations, walkie-talkies can affect this

equipment and should be kept at least a distance d = 3,3 m away from the equipment.

(Note. As indicated in Table 6 of IEC 60601-1-2:2007 for ME EQUIPMENT, a typical cell

phone with a maximum output power of 2 W yields d = 3,3 m at an IMMUNITY LEVEL of

3 V/m)