User's Manual Part 1

12
13
Running Mode
The Lifesense Band 2 can identify whether the user is running or
not automatically.
In the mode of heart rate detection, the Lifesense Band 2 can
identify the user is running and turn on the heart rate detection. It will
save a piece of heart rate and calorie data every minute. If the mode
of heart rate detection is off, it only can identify the user is running,
but won’t start heart rate detection. It will only keep a piece of calorie
data per 1 minute.
You can check running data, including running time, calorie,
average heart rate, the maximum step frequency, average
frequency, total steps, heart rate curve and calorie curve on the app.
Note: If there is no heart rate data, the app won’t display heart rate
curve.
Goal Achievement Reminding
Sleeping Condition Monitor
Night Mode
Heart Rate Detection
Display Mode
Display Settings
The default state of night mode is OFF. You can set it on or off, and the
starting and ending time on the app. In night mode, you could not light up the
Lifesense Band 2 by rotating your wrist, but you could by touching the key on the
screen.
You can select horizontal or vertical display on the app. The default display is
horizontal.
Text notification and call notification only support horizontal display.
Activate startup screen, battery charging, and update screen only support vertical
display. Other pages can support both horizontal and vertical display.
The default mode of heart rate detection is ON. If you set it off, it will stop heart
rate measurement. If you set it on, the indicator with green light will be on for
continuous heart rate detection.
You can decide which screen you want to display on the Lifesense Band 2
through the app. The default pages (time, steps, calorie, distance, heart rate) are
on. You can select the order of displaying pages, and must keep at least one
page on.
You can set the goal achievement reminding on the app. There is a goal
celebration to encourage you to reach your goal. When you reach the setting
goal, it will vibrate twice, and display the encouragement icon about 3s and then
display goal steps about 2s. Then it will turn off and log out the reminding mode.
The default goal step is 6000 steps. You can set it through the app.
You can wear the Lifesense Band 2 to sleep, it will monitor your sleeping
condition. The sleeping data will upload to the app, you can check your sleeping
condition on the app.
Special Function Special Function
Heart Rate Detection is OFF. Can’t detect heart rate. Detect heart rate.
95
OFF
- -