Version:1.0 User Manual Blood Pressure Monitor LS802-E Arm Type ZHONGSHAN TRANSTEKELECTRONICES CO.,LTD Jin’an Road, Minzhong, Zhongshan,528441,Guangdong, China Thank you very much for selecting TRANSTEK Blood Pressure Monitor LS802-E. To use the monitor correctly and safely, please read the manual thoroughly. please keep well this manual in order to reference in future.
CATALOGUE INTRODUCTION ............................................................... 1 Safety information LCD display signal Monitor components BEFORE YOU START .......................................................... 4 The Choice of power supply MEASUREMENT ............................................................... 5 Tie the cuff Start a measurement INFORMATION FOR USER ...................................................... 7 Tips for measurement Maintenance ABOUT BLOOD PRESSURE..................
INTRODUCTION INTRODUCTION LCD display signal Monitor components CUFF AIR HOSE AIR CONNECTOR PLUG User A SYMBOL Guest User B DESCRIPTION EXPLANATION Systolic blood pressure High pressure result LCD DISPLAY DC POWER SOCKET Diastolic blood pressure Low pressure result 2 Pulse Pulse/minute User A provide measurement for user A, and then save the measure date automatically Guest provide measurement for guests, but not save the measurement data.
MEASUREMENT BEFORE YOU START Tie the cuff The Choice of Battery 1.Battery powered mode: 1.Tie the cuff on your upper arm, the position the tube off-center toward the inner side of arm in line with the little finger. 6VDC 4*AA alkaline batteries 2.AC adaptor powered mode: 100-240V~, 50-60HZ,400mA (Can be supplied by AC adaptor model UE08WCP-060100SPA only!) Please unplug the adaptor to depart from the using utility power.
INFORMATION FOR USER BEFORE YOU START Ｓ ｔａｒｔ ｔｈｅ Ｍｅａｒｓｕｒｅｍｅｎｔ Press the (User A) to turn on the monitor and it will finish the whole measurement automatically, and then save the measure date for User A. The same to the (User B). Press the (Guests) to turn on the monitor and it will finish the whole measurement automatically for Guests, but not save the measurement data. In this manual, the measurement of user A as an example. 1.
INFORMATION ABOUT BLOOD PRESSURE Maintenance In order to get the best performance, please follow the below instructions. Put in a dry place and avoid the sunshine Avoid touching water, clean it with a dry cloth in case. What are systolic pressure and diastolic pressure? When ventricles contract and pump blood out of the heart, blood pressure reaches its maximum value, the highest pressure in the cycle is known as systolic pressure.
TROUBLESHOOTING ABOUT BLOOD PRESSURE Why my blood pressure is varies even in one day? This section includes a list of error messages and frequently asked questions for problems you may encounter with your blood pressure monitor. If the products not operating as you think it should, check here before arranging for servicing. 1.
SPECIFICATIONS AUTHORIZED COPMONENT Power supply Battery powered mode: 6VDC 4*AA alkaline batteries AC adaptor powered mode: 100-240V~, 50-60HZ,400mA (Can be supplied by AC adaptor model UE08WCP-060100SPA only!) Display moder Digital LCD V.A.93.5*79mm Measurement mode Oscillographic testing mode Measurement range Pressure: 0~40kpa(0~300mmHg) pulse value:(40~199)times/minute Accuracy Normal working condition Pressure: 5℃~40℃within±0.
Table 1 Guidance and manufacture’s declaration – electromagnetic emissionsfor all EQUIPMENT and SYSTEMS Table 2 Guidance and manufacture’s declaration – electromagnetic immunity – for all ME EQUIPMENT and ME SYSTEMS Guidance and manufacture’s declaration – electromagnetic immunity Guidance and manufacture’s declaration – electromagnetic emission The LS802-E is intended for use in the electromagnetic environment specified below.
Table 4 Guidance and manufacture’s declaration – electromagnetic immunity – for ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING Guidance and manufacture’s declaration – electromagnetic immunity The LS802-E is intended for use in the electromagnetic environment specified below. The customer or the user should assure that it is used in such an environment.
Table 6 Recommended separation distances between portable and mobile RF communications equipment and the EQUIPMENT or SYSTEM – for ME EQUIPMENT or ME SYSTEM that are not LIFE-SUPPORTING Recommended separation distances between portable and mobile RF communications equipment and the ELE007839V1 Fitness Equipment. The LS802-E is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
