User's Manual

FUNCTIONS MANUAL
4. Smart toilet disassembly method
Press the removal button on the side of the smart toilet and pull the product forward in this
state, then the toilet is separated from the seat.
Disassemble
button
Pull forward and raise
to separate
Press the
removal button
5. Instruction for testing after installation
After the installation is complete, it must be commissioned and record the results of the
installation points in the following form.
Check items
Results
Is it connected to the 110-120V~, 13A, 60Hz power outlet? Grounding the
equipment is required.
Is the power outlet loose?
Is the water supply opened?
The spraying nozzle is leaking? After wiping the nozzle, check if there is any
water leakage.
The various functions of the product is normal:
Rear wash and front wash, water temperature and seat temperature adjustment,
cold & hot SPA, soft lighting and nozzle cleaning, etc. Are they normal use? The
above series of actions should be checked.
Date of
installation
Name of the
installation store
Installer
Tighten the various joints (such as the filter, water supply pipes and screw, etc) ?
Is the indicator light on?
Product cleaning and maintenance methods
The body discoloration, cracking and damage caused by the use of the above-
mentioned reagents, even within the warranty period also need to paid the services.
---- Do not clean the product with your hands in case of damage or failure, to avoid
secondary failure.
---- Do not use hydrochloric acid detergent, thinner, bleach, benzene or strong detergent to
clean the surface of the toilet. Do not allow pesticides, air fresheners and deodorants to
stick to the toilet bowl.
Warning: waterproof toilet cleaning precautions
12