User's Manual

FUNCTIONS MANUAL

Warning: do not force out or push into the cleaning

tube during cleaning, or it may lead to machine failure.

1. Nozzle cleaning

①On the machine power mode, do not sit on the seat.

② Press "Nozzle cleaning", entering the manual cleaning

nozzle mode.

(Can not activate "nozzle cleaning" mode when seated)

③ Please use soft brush or soft cloth when cleaning.

④ After the cleaning is completed, press the stop button

or in the seatingstate, the cleaning tube is automatically

retracted.

Nozzle end and

nozzle head

2. Toilet appearance cleaning method

Clean the toilet when the toilet is in fixed state.

① Please use sponge or soft cloth stained with neutral detergent to clean the surface of the

toilet.

② Please use a soft cloth to clean the nozzle cover and dry nozzle cover. Be careful not to

damage the rubber seal.

③Spray water on the toilet and clean it.

④After cleaning, clean the whole cotton cloth.

Disassemble

button

Detergent

Thinner Pesticide Bleach Deodorant

Do not use strong detergent containing hydrochloric acid. Do not use deodorant.

Refer to cleaning precautions.

3. How to clean the gap between smart cover and ceramic toilet.

① Press the disassemble button below the right side of the toilet to detach it.

② Clean the nozzle cover and the drying nozzle cover under the toilet bowl with a soft cloth

or and clean the lower part of the toilet bowl and the ceramic seat toilet with a tool for

cleaning.

③ After cleaning, clean the whole a cotton cloth and install the toilet.