User's Manual

User manual
Made in China
Please read the instructions carefully before using the jump rope.
1.Power on & off/Reset/Mode Button
2. Indication light(Main handle only)
3.LCD display
6.Short ball
4.Batter cover
5.PVC rope
1.Time Countdown Mode 2.Numbers Countdown Mode 3.Free Skipping Mode
Allow Bluetooth for iOS Allow location for Android
Product Size Ф37.5x 164mm
Product Specification
Product Feature
Product Weight 0.21 kg
LCD Display 19.6 x 8.1mm
Power 2xAAA
USB cable N/A
Max. Jumps 9999 times
Max. Time 99 Mins 59 Seconds
Min. Jump 1 time
-1-
Min. Time 1 seconds
Auto off Time 5 Mins
1
2
3
4
Product LCD display
Display in different modes
Jump Modes:
Offline storage function
Reset the rope
Caution and Maintenance
-2-
Bluetooth Icon Battery indication
Free Jumping
Numbers countdown Jumping
Jumping number
Jumping time
Time countdown
Jumping
N
Installation of the Jump Rope
-3-
App Operation
-4-
1.Before starting using the jump rope, please download App: Skipjoy
from App store or Google play. Or scan below QR code to download the App.
The jump handle and the rope/short ball are packed separately in the box,
please follow below steps to assemble rope/Short ball to match with handle
and adjust the length accordingly.
2.During your installation for the App,
iOs: make sure to accept permission requirement on Bluetooth, and allow the
authorization for version 10.0 and above.
Android: make sure to accept permission of GPS & Location.
Note: It is required by Google that all the smart phones operated with Android
Ver. 6.0 or above must ask for the permission of location if any BLE device
could be scanned and linked through Bluetooth. Any private information
would not be collected by the App. You can also refer to the official document
of Google for more information: https://source.android.com/devices/blue-
-5-
3.Open Skipjoy App, fill in your personal info, and start the App.
5.Click the mode you need on the main interface on the App to start your
jumping;
4.Skipjoy will automatically pair the jump rope, you can check the main
interface on the App to check the status of connection.
●“Connected” shown on the main interface means successful pairing.
●“Disconnected” shown on the main interface means unsuccessful pairing. In
this condition,
please press “Account” --> “Device” -->“+” to add the device manually
-6-
Time countdown Jumping:
- set the total jumping time.
- options for time can be set on App: 30 sec, 1 min, 5 min, 10 min, and
customized time;
- Without the App, the rope will use the last countdown setting of time
from the App.
Without the running of App, the data of your jumping will be recorded
temporarily by the rope and synchronized with the App after re-connection.
Press the button on the back of the LCD display for 8 seconds, the rope will
be reset. The LCD will show all the signals for 2 seconds and then shut down.
Press the button again to enter the normal use.
Do not put the rope in very wet or hot environment.
Avoid hitting or dropping the rope violently, otherwise damage may occur.
Treat the rope with care as it is an electronic instrument.
Do not immerse the handle into water or use it while raining, because it is
not water-proof and damage may occur to the built-in electronic device.
The rope is only used for the purpose of physical exercise. Do not use it for
other purposes.
Be careful when using the rope to avoid any injuries, and children under 10
are suggested to use the rope under the watch of parents.
Free Jumping/Time countdown/ Numbers countdown
1.Without App: you can keep pressing the button for about 3 seconds to shift
the mode you need from above three modes.
2.With App: you have four modes for options:
Free Jumping/Time countdown/Numbers countdown/Trainding mode
Free Jumping:
Jump the rope freely and there is no limit on time and number of skipping.
-7-
Numbers countdown Jumping:
- set the total jumps;
- options for number of jumps can be set on App: 50, 100, 500, 1000 and
customized number of jumps.
- Without the App, the rope will use the last countdown setting of time
from the App.
Battery and replacing
Tips for battery:
Battery: The rope has 2*AAA batteries which could sustain
normal use of about 35 days (calculated based on a daily use of 15 minutes,
actual using time varies according to the environment and time of use). The
typical stand-by time is 33 days (experimental data of the manufacturer under
the temperature 25℃ and humidity 65%RH).
For the better life span of the batteries, do not leave the rope with batteries
for a long time. Keep the batteries out of reach of children.
When you do not use the rope for a long time, it is suggested to take out the
batteries.
Do not mix old and new batteries,with different compositions or of different
brands in order to prevent possible leakage explosion.
Battery replacing:If "Lo" appears on the display, the batteries are too weak and
need to be replaced.You require 2x 1.5 V batteries, AAA type.
Waste electrical products should not be disposed of with household
waste. Please recycle
where facilities exist. Check with your local Authority or retailer for
recycling advice.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC ID: 2AP3Q-RS2047LB
-9- -10-
●
●
●
●
●
●
●
8cm
12cm
User manual
Smart Skipping Rope
With speed indication light function
风琴式折法
Main handle installation:
Vice handle installation:
1-Click Free skip to enter Free skipping mode
2-Click Button to stop skipping
3-Click here to share your data
to soical media platform
4-Click Try again to skipping again
1-Click Timer to enter skipping mode
2-Select skipping time you need
3-When time countdown turns to 00:00,
it will end the skipping automatically.
You can stop the skipping if you do not want to
wait time countdown finished.
4-Click here to share your data
to soical media platform
5-Click Try again to skipping again
1-Click Jump countdown to enter skipping mode
2-Select skipping time you need
3-When numbers countdown to 0,
it will end the skipping automatically.
You can stop the skipping if you do not want to
wait numbers countdown finished.
4-Click here to share your data
to soical media platform
5-Click Try again to skipping again
HIIT Mode:
- set the total jumps;
- options for number of jumps can be set on App: 50, 100, 500, 1000 and
customized number of jumps.
- Without the App, the rope will use the last countdown setting of time
from the App.
1-Click HIIT mode to enter skipping mode
Remarks:
HIIT mode is a training mode, please select suitable time and numbers setting
according to your own body health status.
Other App functions
1
3
2
4
5
6
1 & 2: Voice reporting function:
3: Medal Wall function
4 & 5: Challage function
6: Ranking function
Remarks: More interesting functions for the Skipjoy will come soon.
-8-
6
Short ball Skipping
For skipping beginners, or in order to avoid sound noise using rope for
skipping, you can use short ball instead of rope for skipping.
Calorie burnning: Skipping 10 min = Running 30min;
5
Light indication function:
When Light effect is Switch on, LED will light up cyclying through
Red, Green and blue once when beginning and ending exercise.
During skipping, each color represents a specific speed:
Red: >200 jumps/min,
Blue: 160-199 jumps/min
Green: 100-159 jumps/min
Remark: You can change and update different speed value for each light color via device details page.
1-Indication light On/Off
2-Adjust speed value for
every color indication
1 5
6
7
2 3 4
7
1
3
2
4
5
6
Battery installation:
Smart Skipping Rope
With speed indication light function
●
●
Do not heat or deform the batteries or explore to fire.
Waste batteries should not disposed of with household waste.
●
●
Please check with your local authority for battery recying advice.