User's Manual

User Manual
Andea Electronics http://www.gzandea.com 20/44
Table 5 Description for Parameters Setting of Tag Detection Performance
Setting Options
Description
RF Power
Set the RF power of the gate. Default: 4W
Anti-interference Level
Default: best performance
Receive Sensitivity
Default: High
Modulation Depth
Default: ASK 100%
Anti-collision
Slot Type
Default: 16 Slot
5.3.4 Other Parameters
Figure 15 Setting Interface for Other Parameters
Table 6 Description for Other Parameters Setting
Setting Options
Description
Infrared
Analytical
Direction
There are two infrared sensors on the gate. The direction
of the entrance and exit of the aisle is set by the
shielding sequence of the two infrared sensors. Take
"1-> 2 in, 2-> 1 out" as an example, that is, the first
infrared sensor is blocked. Then, when the No. 2 sensor
is blocked, it is determined that the flow direction is the
IN direction. On the other hand, the sensor No. 2 is
blocked first and the sensor No. 1 is blocked later.
Default 1-> 2 in, 2-> 1 out.