User's Manual

User manual
Guangzhou Andea Electronics Technology Co., Ltd. 25/39
http://www.gzandea.com
Figure 33 Configuration interface for data source
① Data field select:
UID: whether to output the 64-bit unique serial number of the discovered tag;
User block: whether to output the data block content of the discovered tag;
Antenna ID: whether to output the antenna ID of the tag;
Input status: whether to output the status of the input port;
② Data field parameters:
➢ UID Length:
The default is to output all 8 bytes. This parameter is valid when the UID
of the “Data field select” is ticked;
➢ User block:
Start byte offset: The offset is calculated by bytes. Take the tag of ICODE
SLI as an example, if the offset byte=5, then it starts to read at
the first byte of the first data block, if the offset byte=3, then
it starts to read at the third byte of the 0th data block ;