User's Manual

User manual
Guangzhou Andea Electronics Technology Co., Ltd. 29/39
http://www.gzandea.com
Frame option: frame header + data field + separator + data field + Terminator;
✓ Enable header: whether to output the frame header byte;
✓ Enable separator: when the output data contains multiple fields, if the
item is checked, the fields are separated by a separator, such as the
comma separator "E004050102030405, 01";
✓ Enable Terminator: whether to output the terminator;
✓ Separator: whether to use the system separator or the custom separator;
✓ Terminator: whether to use the system terminator or the custom
terminator.
System separator: System separator selection.
Custom separator: custom separator, can be set to any value.
System terminator: system terminator selection.
Custom header: up to 4 bytes of frame header data can be defined.
Custom terminator: up to 3 bytes of terminator data can be defined.
6.1.9. Host Mode
Figure 37 Configuration interface for host mode
⚫ Reader as embedded module:
When checked, the reader is used as an embedded submodule.
⚫ Inventory command: