User's Manual

User manual
Guangzhou Andea Electronics Technology Co., Ltd. 15/16
http://www.gzandea.com
After the above steps, you can read and write tags, as shown below:
Figure 17 Single tag reading and writing steps
Steps:
1) Set the data block of the tag to be operated in the Addr drop-down box and the
Num drop-down box. After setting, the operable data block is displayed in green
indicating that it can be operated;
2) Click [Read Block] to read the data value of the data block selected in step 1;
3) Write the value in the line (green area) of the data block whose value should be
written, and then click [Write Block];
4) After the operation is completed, click the [Disconnect] button to disconnect the
tag connection.
6. Technical Support
➢ Download link for development data and testing
https://www.gzandea.com/download.php
➢ Call for equipment debugging and technical support
Mobile phone: [phone]
Fixed telephone: [phone]