User's Manual

User manual
Guangzhou Andea Electronics Technology Co., Ltd. 6/16
http://www.gzandea.com
Table 3 Description of indicator light
Status
Function Description
LED 1
The device is powered on normally when the red
light flashes.
LED 2
The device detects an RFID tag or card when the
blue light is on
5. Instructions Of Configuration Tools
Please refer to Section 3 "Device Connection" to connect the device.
After the device is connected, press the power button. When making sure that the
device is normally powered by observing state of the LED, open the testing tool
"R-Tool "folder, and find the file in the folder directory. Double-click the
file to open the test tool, as shown below:
Figure 7 R-Tool connection interface
Select the corresponding communication method according to the actual interface
type used by the device.