Quick Start Guide
Table Of Contents
- Titelseite
- Weather Stations w Remote Sensor
- Contents
- 1 Imprint
- 2 Validity information
- 3 About this Instruction Manual
- 4 General safety instructions
- 5 Parts overview and scope of delivery
- 6 Screen display
- 7 Setting up power supply
- 8 Automatic time setting
- 9 Receiving measurements automatically
- 10 Key functions
- 11 Technical data
- 12 EC Declaration of Conformity
- 13 Disposal
- 14 Warranty
13/20
7. Replace the battery compartment cover.
8. Wait until the indoor temperature is displayed on the
base station.
NOTICE! When switching from mains power supply
to battery power supply or vice versa, the power
supply is being disabled for a short moment for
technical reasons. Exception: permanent battery op-
eration.
Remote sensor
9. Remove the battery compartment cover.
10. Insert the batteries into the battery compartment. En-
sure that the battery polarity (+/-) is correct.
11. Set the channel selector switch to the desired channel.
NOTICE! This weather station can be operated with
one or more remote sensors. Each remote sensor
being connected must be operated on a different
channel. If only one remote sensor is connected, it
should be operated on channel 1.
12. Replace the battery compartment cover.