User's Manual

2.13 ATS
ATS Automatic Start
When the throttle trigger is set to full throttle simultaneously with starting when the
track is slippery, the car wheels will spin and the car will not accelerate smoothly. When the
Start function is activated, merely operating the throttle trigger slowly causes the throttle
servo to automatically switch from the set throttle position to a preset point so that the
tires do no loose their grip and the car accelerates smoothly.
Throttle without ATS Throttle with ATS
- When the throttle trigger is moved to the preset trigger position (TRI), the throttle
servo moves to the preset position (POS).
- When the throttle trigger is operated slowly so that the wheels will not spin, the car
automatically accelerates to the set speed.
- This function is effective only for the first throttle trigger operation at starting. This
function has to be activated before every start.
- When the throttle trigger is returned slightly, the Start function is automatically
deactivated and the set returns to normal throttle trigger operation.
1.Press “ENTER” to see FUNCTION MENU
2.Use the +/- Keys to select the ATS function and press ENTER.
3.Press ENTER to select TRI item. Use +/- to change the value. Range: -
100%~+100%..
4.Press ENTER to select POS item. Use +/- to change the value. Range: 0%~100%.
5.Press ENTER to select DLY item. Use +/- to change the value. Range: 0~100.
6.Press ENTER to select MOD item. Use +/- to change INH or RDY.
7.Press EXIT twice to save and return to FUNCTION MENU, press EXIT again to return
to the Main Screen.
TERMS:
TRI--- Throttle trigger position.
POS---Preset position
DLY---ATS Delay time
MOD---ATS Ready setting
A T S 1 0 . 2 V A T S 1 0 . 2 V
T R I : 1 %
P O S : 0 %
D L Y : 0
M O D : I N H
F u n c t i o n 1 0 . 2 V F u n c t i o n 1 0 . 2 V
9 : S P E E D
1 1 : M O D U L A T E
1 2 : B R _ M I X
1 0 : A T S
A T S 1 0 . 2 V A T S 1 0 . 2 V
T R I : 1 %
P O S : 0 %
D L Y : 0
M O D : A C T
R/C Introduction Manual R/C Introduction Manual
1615
2.THROTTLE SPEED
- Sudden throttle trigger operation on a slippery road only causes the wheels to spin
and the vehicle cannot accelerate smoothly. Setting the throttle speed function reduces
wasteful battery consumption while at the same time permitting smooth, enjoyable
operation.
- Throttle servo (amp) operation is delayed so that the drive wheels will not spin even if
the throttle trigger is operated more than necessary. This delay function is not performed
when the throttle trigger is returned and at brake operation.
- Adjustment:
1.Select the TH button by +/- Keys.
2.Press Enter to select SPD. FL item.
3.Use +/- Keys change the value.
4.Press exit twice return to the function menu.
SPD.FL DELAY SPD.BK DELAY
Throttle without speed Throttle with speed
TERMS:
SPD.FL- SPEED FORWARD DELAY. Range:0~100%, default:0.
SPD.Bk- SPEED BACKWARD DELAY.Range:0~100%, default:0.