User's Manual

6.3 Dual rates
CH CH
L L L
D/R
D/R D/R
6.4 End point adjustment
CH CH
EPA EPA
L LL
EPA
6.5 Timer
L L
Channel select
To toggle the dual rates menu and make adjustments, click the“UP”and“DOWN”buttons
to enter the functions menu, click“UP” or“DOWN” to scroll to the “D/R”option and
press“SELECT”to enter the dual rates menu. Press“SELECT”again to select the desired
channel and output by clicking“UP”or“DOWN”; after the selection is finalized, press
“SELECT”to exit to the channel selection, and simultaneously click the“UP”and“DOWN”
buttons to exit to the main menu.
This function allows one or more controls to have less (or more)control authority at the flick of
a switch. With the dual rate selected, the servo deflection will appear to have been reduced in
a manner similar to reducing the servo's end points.
Channel select
End point adjustment or EPA, limits the amount of travel on the servo, or esc. For example, an
EPA limit of 50% means that only 50% of the servo/throttle throw is utilized even if the user
input is 100% of the travel on their transmitter.
To toggle the EPA function, click the “UP” and “DOWN” keys to enter the system menu, then click
“UP” or “DOWN” to scroll to the EPA option; press “SELECT” to enter the EPA menu, press
“SELECT” again to select the desired channel and to change its EPA settings by clicking “UP” or
“DOWN”; after the selection is finalized, press “SELECT” to exit to the channel selection, and
simultaneously click the “UP” and “DOWN” buttons to exit to the main menu.
The timer provides audible warnings to the operator in order to control his/her flight time and
prolong battery life.
To set the timer: double click “UP” and “DOWN” simultaneously to enter the function menu,
then press “UP” or “DOWN” to select the “TIME” function; press “SELECT” to enter the setting
menu and select the time by pressing “UP” or “DOWN. After the time has been selected, press
“SELECT” to confirm, then hold down the “UP” and “DOWN” keys to return to the default menu.
Hold “UP” to start the timer, hold “DOWN” to reset.
H-6Q Instruction Manual H-6Q Instruction Manual
14
15