Users Manual

Page 2 of 3
Technical target:
Power Output:
<48 dBuV/m
FM Transmitter Frequencies:
88.1 MHz ~107.9MHz
Tuning Step: 100Khz/0.1Mhz
Power Supply: 12V DC (The current load of power supply should over 2A)
Stability of Frequency:
±0ppm（-10℃~+50℃）
Frequency Response: 100 - 15000Hz
Signal to Noise Ratio: >70dB
Distortion: < 0.5%
Operation Time: True 24/7
Antenna Design: External antenna with RP-SMA connector
Antenna Model: FM ANT1.0
Antenna Gain: 1dBi
Output Impedance: 50 ohm
Audio Input Connector: 3.5mm headphone connector
Mic Input Connector: 3.5mm headphone connector (Use condenser microphone)
Tuning Design: Stable PLL Technology
Size of Transmitter Unit: L:129mm, W:96mm, H:55mm
Weight of Transmitter Unit: 450g
Transmission Signal: FM Stereo