User's Manual

Infrared Thermometer User Manual V1.0
9
 Connect your phone to Bluetooth and open the phone app to view historical data.
 No operation for 30 seconds, the device automatically shuts down.
 Automatically switch the ear temperature and forehead temperature mode through
the probe cap.
Ⅴ. HOW TO USE
1. Taking the measurement
 Forehead temperature mode: Cover the probe cap, press the button. The
device is powered on and automatically connected to Bluetooth. After about 2
seconds, the dot matrix screen displays “FOR” and enters the standby state. it
will display For℃. Take the probe touchs your forehead and then press the button.
Release the button and wait 1 second until you feel the vibration.The
measurement is finished. The LED displays the latest measuring result.No
operation for 30 seconds, the device automatically shuts down.
 Ear temperature mode: Take off the probe cap, press the button. The device is
powered on and automatically connected to Bluetooth. After about 2 seconds, the
dot matrix screen displays “EAr” and enters the standby state. it will display
EAr℃. Fit the probe tip into the ear canal and then press the button. Release the
button and wait 1 second until you feel the vibration.The measurement is finished.
The LED displays the latest measuring result.No operation for 30 seconds, the
device automatically shuts down.
Note:
 In order to avoid the accuracy of the device due to externally too cold or hot
environment, the equipment must be placed in an environment with a
temperature of 5 ° C ~ 40 ° C for at least 30 minutes before use.