Bluetooth Transmitter & Stereo Cassette Player User Manual PLEASE READ THIS OPERATING MANUAL COMPLETEY BEFORE OPERATION THIS UNIT AND RETAIN THIS BOOKET FOR FUTURE REFERENCE.
When you can’t pair a Bluetooth headset/speaker, please check the following: 1. Pay attention to whether the volume is too low, whether the tape is just in the silent segment. You can try to adjust the volume knob to the maximum and press the DIR key to turn the tape. 2. Check whether the battery power is sufficient, otherwise you can try to use a new battery. 3. Make sure the Bluetooth device has sufficient power, you can try to charge the Bluetooth receiving device to pair again then. 4.
Buttons and connections: 1. DC-In 2. Play 3. Auto reverse (DIR) 4. Play Mode 5. Fast Forward 6. Rewind 7. Stop 8. Open door switch 9. Volume control knob 10. Earphone slot 11. Cassette door 12. Battery cover 13. LED light Product features: - Used as a walkman, play cassette tape music everywhere. - With Bluetooth out function, can transmit the music to other Bluetooth receivers. - With Auto-reverse function - 3.
Operation: 1. How to connect to Bluetooth receiver devices? Please make sure to turn on your Bluetooth receiver devices at first. Then Put 2*AA batteries(Not included) into the battery case or used by DC power(Not included) ,Put in the tape and press the “PLAY” button. The device will auto search and pair the Bluetooth receiver. The LED light will begin to fast flash in Blue.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
