User's Manual

A4. The login screen below will appear. Enter the “User Name” and “Password” then
click “OK” to login. The default User name is “admin” and Password is “admin”.
A5. After logging in, you will see the web page below: Click on ‘Repeater’ to continue.
WiFi-Repeater
User Manual
2019.2.22
Wireless-N Wifi Repeater
03
A1. Plug the Wi-Fi Repeater to a wall socket.
How to configure the Wi-Fi Repeater
You will need WiFi
AP/Router Internet access
You will need broadband
Router Internet access
Connect the WiFi-Repeater
to your Router/Switch with
RJ-45 Cable
Getting Started
Wireless-N Wifi Repeater
01
Introduction：
The WiFi Repeater is a combined wired/wireless network connection device
designed specifically for small business, office, and home office networking
requirements. It allows a wireless network to be expanded using multiple access
points without the need for a wired backbone to link them. It also works well with
other 11b/g and 11n protocol wireless products.
NOTE: reset
10
If you need to the Wi-Fi Repeater, you need press and hold the reset
button inside the tiny hole for seconds.
A2. Click on the network icon ( or ) on
the right bottom of your desktop. You will find
the signal from the Wi-Fi Repeater. Click on
‘Connect’ and wait for a few seconds.
A3. Open web browser and type
http://192.168.10.1 in the browser's address
box. This number is the default IP address for
this device.
Note: Please check whether the WiFi-Repeater accord with factory default settings
once you can’t download http://192.168.10.1. If you are still not sure what reasons,
you can reset the WiFi-Repeater, just need to press the button for seconds,
then try again.
reset 10
You can configure the Wi-Fi Repeater by connecting it with your computer/laptop with
enclosed RJ45 cable or wirelessly.
A. Configure the Wi-Fi Repeater wirelessly.
Wireless Repeater Mode
Wireless AP Mode
Before you starting to use this router, please check if
there’s anything missing in the package, and contact
your dealer of purchase to claim for missing items:
· 1 x Wireless-N Repeater
· 1 x RJ-45 Networking Cable
· 1 x Quick installation Guide
Package Contents
Reset
Reset
RJ45 Port
Power Indicator
WPS Indicator(Optional)
Wireless Indicator
LAN Indicator
WPS Button(Optional)
Open Source Code
This product includes software codes developed by third parties. These software
codes are subject to either the GNU General Public License (GPL), Version 2, June
1991 or the GNU Lesser General Public License (LGPL), Version 2.1, February
1999. You can copy, distribute, and/or modify in accordance with the terms and
conditions of GPL or LGPL.
The source code should be complete, if you think our need to provide any additional
source code files under GNU General Public License (GPL), please contact us. We
are committed to meeting the requirements of the GNU General Public License
(GPL) . You are welcome to contact us local office to get the corresponding software
and licenses. Please inform us your contact details and the product code. We will
send you a CD with the software and license for free.
Please refer to the GNU GPL Web site for further information.
http://www.gnu.org/licenses/licenses.en.html.
For a typical wireless setup at home (as shown below), please do the following:
Setting up a Wireless Infrastructure Network
Wifi Repeater
Connect
http://192.168.10.1/home.asp
Repeater
AP
Wizard
User-PC Repeater WAP/Router Internet
Wireless status
Wireless
Management Status
Internet
Mode AP
Stauts Enabled
SSID Wifi-Repeater
Channel 1
Security Disabled
Clients 0
Basic settings IP 192.168.10.1
DHCP Server
MAC 80:3f:5d:81:96:c1
Firmware version
RptM.321.38.1119
Uptime
RptM.321.38.1119
Build time
Mon Nov 19 11:35:57 CST 2012
Advanced settings
WPS
Schedule
Time zone settings
Password
Save/Reload settings
Upgrade Firmware
Computer 1
Computer 1
Computer 2
Wifi Repeater
Wifi Repeater
Internet
Internet
Lan Cable
Router
Router
Computer 3
Computer 3
Username
Password
Language
Submit
English
admin
Wireless-N Wifi Repeater
02
Wireless-N Wifi Repeater
03
Wireless-N Wifi Repeater
04