User's Manual

26
function meter filter, which must be a legally marketed product registered by the
FDA.
2) The whole inspection process, the subjects can obtain the best cooperation according
to the timely instructions and continuous guidance issued by the technician. Rest for
5-10 minutes and repeat the second and third tests.
3) Each time the tested patient completes a set of measured values, the monitoring page
will prompt whether the measured results are acceptable. Such as ticking is acceptable,
you can click "F3 Stop" to end this test and save the data. Such as the cross is an
unacceptable result and the reason is prompted ,you can click " F1 start" to start a test.
4) The system will obtain an acceptable quality level after completing 3 blows. If there is
a low-quality measurement record that is unacceptable for a single operation , you can
click to select the measured record to delete it.
Figure 20 Maximum minute ventilation test interface
6.6.4 Report preview
Click the "Generate MVV report" button to enter the report preview and operation process
page: