User's Manual

26
3) Each time the patient completes a set of measured values, the monitoring page will
prompt whether the measured results are acceptable. Such as ticking is acceptable,
you can click "end" to end this test and save the data. Such as the cross is an
unacceptable result and the reason is prompted, you can click "New Test" to start a
test.
4) Report preview and printing: When the MVV test is completed, the actual
measurement record quality control meets the requirements, click the "Preview Report
" button to enter the report preview function page. After selecting the report template,
the MVV index will be displayed in the report index area and the volume - time chart
of the MVV test will be displayed in the graph area ;
5) Maximal voluntary ventilation ( MVV ) program is finished, Please choose whether to
continue the test in other modes according to the actual situation.
6) After the maximal voluntary ventilation test (MVV) measurement is over, please
choose whether to proceed with other mode tests according to the actual situation.
Figure 15 MVV single measurement interface
6.5.2 Report preview
Click the "Preview" button to automatically jump to the "MVV report" interface, as
follows: