Installation Manual

When there is no QR code on the device

1. Make sure the device have connected to the Internet router by cable;

2. Click "Connected devices" in the Addition device interface;

3. Fill in the serial number of the device and click on the upper right corner to

confirm the addition.

Wired connection installation

Android：

iOS：

If there is no QR code on the device, click the prompt "Can't find the device QR

code?" button on the scan code interface(Figure 3), the device will automatically

search for wireless devices near the phone (Figure 9), select the device you need,

click the Addition button to jump to the WIFI interface. The subsequent distribution

steps are the same as (1).

If there is no QR code on the device, click on the prompt "Can't find the device QR

code?" button on the scan code interface (Figure 3), the device will jump to the

operation guide prompt interface (Figure 10), follow the operation guide and go to

the mobile phone setting interface to connect to the device hotspot, then return to

the “IP PRO”, and jump to the WIFI interface, The subsequent distribution steps

are the same as (1).

54 6

Fig 11 Fig 12Fig 8 Fig 9 Fig 10

Fig 6 Fig 7

Warning

In case of fire or lightning,pls don’t put product in damp and

raining place,operate or maintain according to the user manual.

Be careful when you see attachment with a Dangerous Voltage

which might cause serious electric accident.

Notice:

1. Ensure your equity,pls read the user manual carefully before you use the

product

2. Pls contact professional people if you need install and maintain the product

3. Input voltage of this model is DC 12V

4. Working Environment:temperature of -20°C~+60°C,relative humidity under 85%

5. Pls don’t exceed the user manual’s standard range of temperature,humidity

and voltage.

Warning

In case of electric shock and fire,

pls don’t use power supply

beyond power list in user manual

CAUTION RISK OF ELECTRIC

SHOCK DO NOT OPEN

To reduce electric shock,

unprofessional people

please don’t open product

front panel or rear panel