User's Manual

Connect the Wireless NVR power
adapter to the Power Input on the
rear of the Wireless NVR.
Connecting Your System
5 6
Router not included
You may also connect using VGA (not included)
HDMI
Surge
Protector not
included
Plug one end of the included
HDMI cable into the HDMI port on
the back of the Wireless NVR.
Connect the two included antennas
to your wireless NVR. This will
ensure you achieve the maximum
wireless range for transmission from
your wireless cameras.
Plug one end of the included
Ethernet cable into the LAN port
on the back of the Wireless NVR.
Plug the other end of the HDMI
cable into the back of your TV
or monitor.
Ensure you are using the correct
power adapter when setting up
your system.
You should see each camera appear on your TV/Monitor. You may now proceed
to install your Wireless NVR cameras in the desired location.
Plug the other end of the Ethernet
cable into a port on the back of
your router.
Plug the Wireless NVR power
adapter into a surge protector
or Uninterruptible Power Supply
(UPS). (surge protector and UPS
not included)
21
4
3
5
To ensure all cameras are working
properly, please test them locally
before installing them.
Connect the included camera
antenna to the antenna mount on
the camera.
10
9
6
8
7
HDMI
ETHERNET
Each camera comes equipped
with its’ own camera power
adapter. Connect the female
power cable coming from the
camera to the male power end
of the camera power adapter.
Next, plug the camera power
adapter into a wall outlet.
11
ETHERNET
The Camera and NVR
power adapters will be
appropriately labeled.
WNVR Series QSG.indd 4 3/13/17 4:31 PM