User's Manual

goes out.
Pairing mode
Keep the MF button pressed until the LED lights up blue.
Reconnection mode
Keep the MF button pressed until the LED flashes blue.
Switching the headset off
Keep the MF Button pressed until the LED flashes blue then goes off.
Pairing the headset with your mobile phone
1. Keep the distance between the headset and your mobile phone ( or other Bluetooth
device) within 1 meter. The closer, the better.
2. Keep the MF button pressed until the LED lights up blue. the headset is in pairing
mode.
3. Switch on the Bluetooth function of your mobile phone, on which start a search for
Bluetooth devices.
4. From the found Bluetooth devices, select “H” to establish a Bluetooth connection
to the headset. If necessary, enter thedefault PIN code “0000”.
5. Once the headset is paired with the mobile phone, the LED flashes blue.
Attention: If pairing is not successful within 60 seconds, the LED goes off and the
Bluetooth pairing ends. Repeat the pairing procedure.
Disconnecting the headset with your mobile phone
1. Switch the headset off.
2. Or switch off the Bluetooth function of your mobile phone.
3. Or take the headset from your mobile phone 10m away or even farther.
Reconnecting the paired headset to your mobile phone
1. Keep the distance between the headset and your mobile phone( or other Bluetooth
device) within 1 meter. The closer, the better.
2. Keep the MF button pressed until the LED flashes blue. The headset is in
reconnection mode.
3. Switch on the Bluetooth function of your mobile phone. The headset will
automatically reconnect to it.
Answering a call
When there comes a call, the LED flashes blue; press the MF button once, or use your
mobile phone to answer it.
Ending a call
Press the MF button once. Or use your mobile phone to end it.