User's Manual

Rejecting a call
After hearing a beep, keep the MF button pressed for around 2 seconds or use your
mobile phone to reject it.
Call waiting (need your mobile phone to support)
When you are on call 1, there comes call 2; to answer call 2 and keep call 1: keep the
MF button pressed for around 2 seconds.
When call 2 ends, to switch back to call 1: keep the MF button pressed for around 2
seconds
Redialing the last call
Press the MF button twice.
Voice dialing(need to be supported by your mobile phone)
Keep the MF button pressed for around 2 seconds.
Voice prompt selection
Switch the headset on, press the MF button and Vol- button once at the same time to
select English/Chinese/French/Spanish.
Muting
When you are on call, keep the Vol- button pressed to mute the Microphone; keep the
Vol+ button pressed to cancel the muting.
Audio sharing
Connect the headset with your mobile phone via Bluetooth , then connect the headset
to another headphone via audio cable.
Being a Bluetooth receiver
Connect the headset with your mobile phone via Bluetooth , then connect the headset
to amplifier via audio cable.
Line-in connection
connect the headset with your mobile phone via audio cable.(in this mode, the headset
cannot be used for communication)
EQ adjustment(only in Bluetooth mode)
When the headset is playing music, press the Vol+ button and Vol- button once at the
same time.
Track play/pause
Pause the track: press the Wheel switch once
Resume the track: press the Wheel switch once again.