User's Manual

6
• Make sure a mode (Mouse or Presenter) is
selected using the Mode Switch Button
• Unplug and plug the USB wireless receiver
into the USB port of your computer
• If the problem still exists, try the steps 1-4
below to reset the Presenter Mouse
1. Turn the Presenter Mouse to Mouse mode,
and make sure the distance from the USB
wireless receiver is within 2-meter.
2. Press Scrolling wheel and DPI switch
button simultaneously for 3 seconds.
3. The optical sensing light will blink three
times, the reset is complete.
4. The Presenter Mouse is ready for use.
Notice
• Avoid pointing the presenter's laser beam
into a person's eyes, at a mirror or other
highly-reflective surfaces
• DO NOT attempt to disassemble and service
the Presenter Mouse
• Keep the Presenter Mouse out of the reach of
children