User's Manual

www.mcohome.com User Manual
MCOHome Technology Co., Ltd
3
Operation
On/Off Setting
When power on, thermostat will display “OFF”，press to enter working interface.
When normal working, press to turn off the device, “OFF” displays and all outputs are off.
Local Time Setting
Press & hold “M” to enter local time setting. Touch “M” to switch among Week, Hour & Minute,
and then press or to set the parameters of flashing item. Press “M” ,or wait for 15s to save the
value and return to display.
Working Mode Setting
Touch “M” to enter working mode setting, the current mode flashing. Press or to switch
among Cooling , Heating & Ventilation mode, then press “M”, or wait for 15s to
confirm the choice.
Temperature setting
Touch or to set local temperature value. Hold the buttons can set continuously. Press
“M” , or wait for 15s to save and return to room temperature display.
Fan Speed setting
In normal display, press to switch among the fan Speed: “Low, Medium, High, Auto”; Then
press “M”, or wait for 15s to confirm the choice.
Note: In Ventilation mode, no Auto speed choice.
 Fan Manually control
If fan speed is manually set, the device still auto controls the fan in such situation:
Cooling Mode：
Room temperature ≤ setting temperature, valve closes and fan stops;
Room temperature ≥ setting temperature +1 , valve ℃ and fan opens.
Heating Mode：
Room temperature ≥ setting temperature, valve closes and fan stops;
Room temperature ≤ setting temperature -1 , valve ℃ and fan opens.
 Fan Automation
Cooling
Mode
a. Room temperature ≤ setting temperature, valve closes automatically, fan stops;
b. Room temperature ≥ setting temperature +1 , fan turned ℃ on in low speed;
c. Room temperature ≥ setting temperature +2 , fan turned ℃ on in medium speed;
d. Room temperature ≥ setting temperature +3 , fan turned ℃ on in high speed;
Heating
Mode
a. Room temperature ≥ setting temperature, valve closes automatically, fan stops;
b. Room temperature ≤ setting temperature -1 ,℃ fan turned on in low speed;
c. Room temperature ≤ setting temperature -2 , fan turned ℃ on in medium speed;
d. Room temperature ≤ setting temperature -3 , fan turned ℃ on in high speed;
Note: Fan will operate only if the valve opens.