Quick Start Guide
Charging
Plug the charging cable into the speaker’s charging port with the included cable.
The device will automatically begin charging once the adapter is connected to the unit. The
unit will also power on when connected to a power source even if the baery power is low.
When the baery is full, the charging indicator light on the front panel will turn o.
The device takes approximately 5 hours to fully charge. With standard usage, a fully charged
baery can play for about 2 hours.
TWS:
Turn on Bluetooth
®
mode, then press and hold the TWS buon to enter TWS function. Once
conrmed, link two ZIZO Ampify speakers together with the same bluetooth device.
Press and hold the TWS buon again to cancel TWS funtion.
FM Function:
1. Choose”Mode” to switch to FM radio.
2. Choose”PLAY/PAUSE” for automatic searching and saving.
3. Choose”PREV” and “NEXT” to switch channels.
Microphone:
1. Plug in your microphone into the microphone jack on unit main control panel.
2. Use the “ECHO” knob to control microphone echo.
AUX:
1. Press the audio input on unit on main panel on the top.
2. Insert the Aux cable plug into the Aux input, then connect with your device.
3. Pull out the cable when nished listening.
Power ON / OFF
1. To turn on speakers, press the power buon on.
2. To turn o, press the power buon o.
Bluetooth
®
Pairing
1. When using the Bluetooth, please tap seings, then open”Bluetooth”.
2. Scan from your phone, tablet, notebook for AMPLIFY, and pair the device to the speaker,
turn on your music in the device, then you can listen audio les through the speaker.
3. Unpair from speaker when nished listening.
GETTING STARTED USING YOUR DEVICE
Ensure the speaker is fully charged before using for the rst time.