Installation Instructions

For user need automatic
relocking function-------
Install the door position sensor
on the side of the door, another
part(magnet) need to be installed
opposite to the door position
sensor. The center of the door
position sensor and the magnet
need to be aligned in same line.
If user want to use manual
relocking, just don’t install the
door position sensor.
IMPORTANT: Before installing
the batteries, test the
mechanical operation of the
lock by using both thumb turn
and the key.
The movement of the bolt
should be smooth and
unobstructed. If operation is
not smooth, review the
previous steps to ensure
proper installation.
Figure J-4
Figure J-5