Installation Instructions

3. INSTALLATION
IMPORTANT THINGS INSTALLER NEED TO KNOW
PRIOR TO INSTALLATION
a. Initial password “123456”
b. Bolt Direction
Please make sure the bolt is installed in correct direction according
to ”up” mark on the bolt. (see Figure C1)
c. The bolt must be in a retracted (unlocked) position when installing the
lockset. (see Figure C2)
d. The cable from the outside escutcheon should go under the bolt, (see
Figure C-3) and should go through the slot at the right side of the
mounting bracket. (see Figure C-4)
Figure C-1
Figure C-2
Figure C-3
Figure C-4