User's Manual

5. Switch Administrator
5.1.
5.2.
Delete the Administrator right
Open the APP- locate the lock - click Setting - click Delete - enter your account
password - click OK - Using a new phone to pair the lock again. A lock can only be
paired with one administrator phone. Please stand within 10 meters away from the
lock to open and connect the APP.
Switch through the Transfer locks function.
Turn on the APP - click System Settings - click Transfer Locks - Select Locks - click Next
- enter the recipient's APP account and the verification code - click Next - Finish (The
phone is required to be connected to WiFi or mobile data network & within 10 meters
from the lock ).
6. Freeze / Delete / Authorize / Name / Operate Already Sent ekeys by Administrator
Turn on the APP- click eKeys - click the ekey that has been sent - click Name / valitidity /
delete the eKey info you need - clicking the menu on the upper right corner to conduct
the freeze / authorization operation. (The phone is required to be connected to WiFi or
mobile data network.)
7. Remote Authorization of Passcode
Turn on the APP - click Send passcode - select the type of the passcode (Permanent /
Timed / One-time / Custom / Recurring) - click Generate. Then it will create a passcode.
You can send the code to others by SMS, email and other chatting tools.(The phone is
required to be connected to WiFi or mobile data network.)
8. Delete Already Sent Passcode by Administrator
Turn on the APP - click Passcodes - select the passcode that has been sent - delete the
passcode (The phone is required to be connected to WiFi or mobile data network and
within 10 meters from the lock).
9. System Reset
The reset button is on the backside of front panel, right behind the number 4 on the
touchpad. Keep pressing the reset button with a piece of long and thin needle for over 5
seconds, your smart lock system will be restored to factory default settings and delete all
smartphones and fobs from the memory.
09