User's Manual

Installation Diagram
Installation Diagram
A
K
G
C
B
J
D
F
M
L
H
I
E
Step 1
According to the map drilling holes on the door.
Note:
1) Check the required backset (60mm or 70mm).
2) Align the template along the vertical center
line of the deadbolt(E) at the desired height,and
tape it to the door.
3) Mark the holes first, then start drilling.
A) Outdoor lock body
*
1
B) Silicon gasket
*
1
C) Mounting plate
*
1
D) Indoor lock body
*
1
E) Deadbolt
*
1
F) Cylindrical sleeve bolt * 1
G) M4 x 25mm cross flat head bolt *1
H) M4 x 30mm cross flat head bolt * 3
I) M4 x 10mm cross flat head bolt * 2
J) M4 x 25mm cross flat head self-tapping screw * 4
K) Mechanical key * 2
L) Strike plate * 1
M) Latch holding plastic box * 1
02