User's Manual

Step 2

Install the deadbolt (E) with screws (J) on the door.

Step 3

Install outdoor unit(A) with cylindrical sleeve bolt(Ｆ)and gasket(B) on outdoor unit(A).

Step 4

Install mounting plate (C) with M4 cross ﬂat head bolt (H) on the door.

Note:

The deadbolt has TWO backset

options: 60mm or 70mm, please

adjust it by yourself.

Note: DO NOT Push the latch out

before installation.

Note: Cable goes

underneath deadbolt.

Note: The cable goes through the notch on the

lower right part of the mounting plate at ﬁrst.