User's Manual

Connections
-8-
Bluetooth Connection
Use the power cord one terminal connect to power cord socket on the
bluetooth speaker,the other terminal connect to AC outlet,press standby
button power on the speaker, the blue indicator flashing quickly, you will
hear the voice prompt of Sound Piece Ready To Go,Pairing Device, the
speaker access in searching bluetooth signal status.
you
will hear the voice prompt of Device Connected, speaker was
connected to your smart phone,the blue indicator flashing
slowly,d
Device
Disconnected,Pairing Device.
The bluetooth is connected to your smart phone successfully for the first
time, disconnect the bluetooth on your smart phone then reconnected it,
the speaker will memories your smart phone and repaired automatically.
Hold down [BLUETOOTH] button for 3 seconds
when you hear the voice prompt of Device
Disconnected,Pairing Device
automatically.
Note:
Bluetooth connection range in 10 meters.
The model in your device was not deleted.
The speaker need to input the password 0000 when the matching blue
tooth device under version 2.1.
Use your smart phone to select Sound Piece on your bluetooth list ,
the
isconnected the bluetooth on your smart phone to switched off
the bluetooth connection,and you will hear the voice prompt of
to disconnect the
bluetooth connection
, clear the paired memory history by
pressing [STANDBY] button for 2 times and the speaker could not
repaired
Hold down [STANDBY] button to power off the bluetooth speaker and
you will hear the voice prompt of Sound Piece Going To Sleep.
Sound Piece
In bluetooth mode,[BLUETOOTH],[VOLUME+/-] etc. are also active.
Bluetooth
Model:Sound Piece