User's Manual

9
Rugged Speaker System
www.insigniaproducts.com
3.5mm AUX (LINE IN) connection
1 Turn on your speaker system.
2 Press the SOURCE button on the speaker system repeatedly to select
“LINE”.
3 Connect one end of a 3.5 mm audio cable to your speaker system’s LINE
IN jack.
4 Connect the other end of the 3.5 mm audio cable to the headphone or
AUX Output on your audio source device.
USB connection
1 Turn on your speaker system.
2 Press the SOURCE button on the speaker system repeatedly to select
“USB”.
3 Plug a USB thumbdrive into the USB port on the top of your speaker
system.
Microphone
• Plug your microphone into the microphone jack on the top of your
speaker system.
Using your speaker system
This system lets you access five different sound sources (TUNER (FM), AUX
(LINE IN), USB, Microphone, and Bluetooth (BT)).
Listening to your speaker system
1 Turn on your speaker system.
2 Press the SOURCE button on the speaker system repeatedly to select the
audio source you want, or to select TUNER mode (TUNER will appear on
the display).
3 Turn on the audio source device connected to your speaker system and
begin playback.
4 Adjust the volume on your speaker system or the source audio device to a
comfortable level.
Note
You can also plug a memory card reader into the USB
port to play audio from a memory card.
Warning
Continuous use of high volume sound may
permanently damage your hearing.
NS-HMPS3018_17-0059_MAN_V1_ENG.fm Page 9 Wednesday, March 8, 2017 9:36 AM