DP500 PROFESSONAL 33/45 RPM TURNTABLE WITH MAGNETIC MOVING CARTRIDGE, PITCH CONTROL, AUTO RETURN & BLUETOOTH TRANSMISSION INSTRUCTION MANUAL READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USE 1
PRODUCT FEATURES - 33/45 RPM SELECTABLE TURNTABLE BELT DRIVEN SYSTEM LIFT LEVER RCA LINE-OUT DETTACHABLE HEADSHELL AUTO-RETURN TONE-ARM PITCH CONTROL FOR TURNTABLE BLUETOOTH TRANSMISSION PC LINK FUNCTION (RECORDING FROM TURNTABLE TO COMPUTER) ACCESSORIES INCLUDED: 1. TURNTABLE PLATTER 2. SLIP MAT 3. DUST COVER 4. 45 RPM ADAPTOR 5. WEIGHT-COUNTER 6. AUDIO TECHNICA CARTRIDGE AT-3600L 7. OPERATION MANUAL 8. EXTERNAL POWER ADAPTOR 9.
CAUTION: USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULTE IN HAZARDOUS RADIATION EXPOSURE. THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL. WARNING: - THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
- HOLD THE WEIGHT-COUNTER WITH ONE HAND, TURN SCALE RING TO “0” AGAINST SCALE LINE ON THE SHAFT WITH ANOTHER HAND, BE SURE NOT TO TURN TOGETHER WITH THE WEIGHT-COUNTER. - AUDIO-TECHNICA AT-3600L CARTRIDGE NEEDS TRACKING FROCE AROUND 2.5 GRAM. TO REACH THIS TRACKING FORCE, TURN THE WEIGHT-COUNTER INWARD TILL “3” ON THE SCALE RING. - THERE IS TOLERANCE IN WEIGHT AROUND +/-0.5 GRAM.
WEIGHT COUNTER END IS TOO HEAVY, TURN THE WEIGHT COUNTER INWARD TO ADJUST: HEADSHELL END IS TOO HEAVY, TURN THE COUNTERWEIGHT BACKWARD TO ADJUST: ANTI-SKATING ADJUSTMENT TO ADJUST THE ANTI SKATING MECHANISM, TURNING THE ANTI-SKATE KNOB COUNTER CLOCKWISE CAN REACH 0 GRAM OF TRACKING FORCE. TURNING THE ANTI-SKATE KNOB CLOCKWISE CAN REACH 4 GRAM OF TRACKING FORCE. ADJUST THE ANTI-SKATING KNOB IN CASE OF NEEDLE SKATING. PICKUP SELECTOR - PHONO / LINE SELECTOR IS LOCATED AT THE BACK PANEL.
- REMOVE THE CABLE PROTECTIVE CAP UNDER THE HEADSHELL IF END USER TAKES OUT THE WHOLE CARTRIDGE: LINE OUT SOCKET - THIS SYSTEM CAN BE CONNECTED WITH EXTERNAL DEVICE (EG. ACTIVE AMPLIFIER AND SPEAKER) BY RCA LINE-OUT SOCKET AT REAR CABINET. CONNECT EXTERNAL DEVICE (EG. ACTIVE AMPLIFIER AND MIXER) WITH GROUND LEAD IF NECESSARY. DIGITALIZING TURNTABLE INTO COMPUTER 1. CONNECT THE PRODUCT TO A COMPUTER VIA THE USB CABLE 2.
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
