Specifications

SKI.W7603.1
8
QR-ZZPJ-017A
版权 CVTE 所有，本文档内容属商业机密。未经允许，任何组织或个人不得以任何形式复制和传播。
10. Mechanical,Environmental and Reliability Tests
（机械、环境和可靠性测试）
Test Items
Test Conditions
Qty
Criteria Condition
The packed samples within
10-1
Drop test
100Kg can be tested
Drop height:
Face Side: 800/600/450mm
1xBox
After drop test, the outer box and inner
box will not been broken by appearance
Edge line: 600/450/350mm
visual inspection.
Drop time: 1 each Face and
edge.
10-2
Vibration
test
X-Y-Z direction, first Frequency
changing from 10Hz to 30Hz to
10Hz,amplitude 0.75mm,
5 times vibrations, then
frequency Changing from
30Hz to 55 Hz to 30 Hz,
amplitude 0.15mm, 5 time
vibration.
3
After test, the Appearance, Power EVM
and Frequency error shall be satisfied
with the specification.
Impact acceleration:
After test, the Appearance, Power EVM
10-3
Impact test
50m/sec2;
3
and Frequency error shall be satisfied
Impact duration: 16ms；
with the specification.
Impact times: 1000.
1.After soldering, the soldered area must
be covered by a smooth bright solder
10-4
Soldering
ability test
Soldering temperature:
235±5℃
Soldering duration:
3
layer, some deficiencies such as a small
amount of the pinhole, not wetting are
allowed, but the deficiencies can not be
in the same place；
2±0.5S
2.At least 90% of soldered area shall be
covered continuously by the soldering
material.
10-5
Humidity
test
Leave samples in 40±3℃,
93% RH @ 96 hours
3
Leave samples in standard test condition
for 2 hours then test, the Appearance,
Power, EVM and Frequency error
functional parameter shall be satisfied
with the test specification.