Specifications

SKO.W603.6
10
QR-ZZPJ-017A
版权 CVTE 所有，本文档内容属商业机密。未经允许，任何组织或个人不得以任何形式复制和传播。
9-7
Low
temperature
start test
Leave samples in -15℃ for
4x hours
4
After test, power on and off the samples
for 3x tiems, the samples should be able
to start normally
9-8
High
Temperature
and
Humidity
Storage Test
Leave samples in 85℃, 95%
RH @ 48 hours
4
After test, the products appearance,
power, EVM and frequency error
functional parameter shall be satisfied
with the test specification.
9-9
Low
Temperature
Storage Test
Leave samples in -40℃, @48
hours
4
After test, the products appearance,
power, EVM and frequency error
functional parameter shall be satisfied
with the test specification.
9-10
Thermal
Shock Test
-40~85℃，dwell time：
30min，50cycles
4
After test, the products appearance,
power, EVM and frequency error
functional parameter shall be satisfied
with the test specification.
9-11
Aging Test
60℃，120Hrs
10
The products at high temperature for a
long time can continuous work normally
9-12
Salt spray
test
NSS,35℃,PH:6.5~7.2,
2
The Sample shall has no minor or major
defects, such as physical damage, crack,
corrosion, deformation etc;
9-13
ESD
Discharge voltage:
1kV C: 150pF
Discharge resistance：330Ω
Positive10 times
1 time for each second
3
The products can recoverable smoothly
after ESD test.