Specifications
Table Of Contents
- 1.Introduction(簡介)
- 2.Features(特性)
- 3.Block Diagram(結構框圖)
- 4.Package Outline and Mounting(外形及安裝尺寸)
- 5.Pin Definition(引腳定義)
- 6.Product Pictures(參考圖片)
- 7.Key Materials(關鍵物料)
- 8.General Requirements(一般要求)
- 9.Electrical Characteristics(電氣特性)
- 10.Reference Design(參考設計)
- 11.Mechanical,Environmental and Reliability Tests
- (機械、環境和可靠性測試)
- 12.Connector(連接器)
- 13.Package(包裝)
SKO.WB822CU.3
QR-ZZPJ-017A
版權 CVTE 所有,本文檔內容屬商業機密。未經允許,任何組織或個人不得以任何形式複製和傳播。
17
Start Test
11-7
Low
temperature
start test
Leave samples in -15℃ for
4x hours
4
After test, power on and off the samples
for 3x tiems, the samples should be able
to start normally
11-8
High
Temperature
and
Humidity
Storage Test
Leave samples in 85℃, 95%
RH @ 48 hours
4
After test, the products appearance,
power, EVM and frequency error
functional parameter shall be satisfied
with the test specification.
11-9
Low
Temperature
Storage Test
Leave samples in -40℃, @48
hours
4
After test, the products appearance,
power, EVM and frequency error
functional parameter shall be satisfied
with the test specification.
11-10
Thermal
Shock Test
-40~85℃,dwell time:
30min,50cycles
4
After test, the products appearance,
power, EVM and frequency error
functional parameter shall be satisfied
with the test specification.
11-11
Aging Test
60℃,120Hrs
10
The products at high temperature for a
long time can continuous work normally
11-12
Salt spray
test
NSS,35C,PH:6.5~7.2,24H
2
The Sample shall has no minor or major
defects, such as physical damage, crack,
corrosion, deformation etc;
11-13
ESD
Discharge voltage:
1kV C: 50pF
Discharge resistance:330Ω
Positive10 times
1 time for each second
3
The products can recoverable smoothly
after ESD test.