User's Manual

Galaxy G1 
- 41 -
Note: If you start the base station successfully the first time, you can directly
open the base station mainframe and it will operate automatically if you don’t
want to change the configuration.
5˅The radio channel setting
Set the radio channel on control panel of the external radio.
¾ Set the radio channel, there are eight channels to choose from˗
¾ Set the radio power, if the working distance is not far, and interference is low,
you can choose the low power transmitting˗
¾ If the radio is successfully transmitted, the TX indicator will flash at
intervals˗
§3.2.3 Set up rover station
After verifying the successful transmitting of the base station, you can start the
erection of the rover station. The steps are as follows:
1) Set the receiver to the rover station radio mode;