User's Manual

Galaxy G1 
- 43 -
3) Set the rover station parameter, normally you only need to set the differential
data format, select the same format with base station setting, confirm and return
to the main interface;
4) Channel settings: Configuration → Instrument Config → Radio channel
setting, switch the radio channel to the same with the base channel;
Setting finished, after the rover station reaches the fixed solution, you can see
the high-precision coordinates in the handheld. The Follow-up new construction
and conversion parameters please refer to the other manual <<EGStar 3.0 User
Manual >>
§3.3 RTK operations ˄
˄
GPRS mode
˅
The main difference between RTK GPRS mode and Radio mode is the network
transmission of differential data. Therefore the erection is similar to the radio
mode, the setting of EGstar is much different, and the introduction is as follows: