User's Manual

Galaxy G1
- 46 -
3) Enter the network configuration information in turn, select "Eagle" for the
base station, “Access” please enter machine number or customize.
After setting, click "OK." and enter parameter configuration phase. And then
click "OK" to return to the network configuration interface;
Connection: After connection click "OK" to enter the EGStar initial interface
Note: The rover station’s connection with CORS is similar to RTK, except the
option of VRS-NTRIP, specific procedure please refer to another manual
<<EGStar3.0 user manual>>
§3.3.3 Electronic bubble
1. Start electronic bubble
In the interface of Point survey, click the collection setting button on the top
of the screen; you will enter the setting interface.