User's Manual

Galaxy G1 
- 53 -
Chapter 4 Connecting to PC
Reading this chapter, you can grasp in detail how to connect Galaxy G1 to the
computer for data transfer, and the mainframe setting.
§4.1 Mainframe data transfer
The receiver document management of Galaxy G1 uses U disc storage, plug and
play, does not need to download the program, directly drag and download. The
multi-function data cable is used to download, connect one end to USB, the other
end to the nine-pin socket at the bottom of the mainframe. After connected,
there will be a new drive on the computer, like a flash disk, can copy the
appropriate file directly.
Open the "Removable Disk" you can see the data and system files in the
mainframe memory
As shown in Figure, STH file is the data files acquired by Galaxy G1 mainframe,
the modification time is the end of the data collection time. The original files can
be copied directly to the PC, you can also download In-star to copy data to PC,
using the In-Star software to modify the file name and the antenna height, and
the next section will introduce the In-Star in detail.