Product Description

GPON 1GE+1FE+WiFi+CATV ONU Introduction V1.1
4 Access the world
CATV(for
V2802GWT)
CATV
On 1550nm wavelength power of input is in normal range.
Off
1550nm wavelength power of input is too low or no
input.
Blink
1550nm wavelength power of input is too high.
Table 3 Panel lights on
1.6 Interface description
Port Type
Function
PON
V2802GW: SC/UPC type, single mode optical fiber cable
V2802GWT: SC/APC type, single mode optical fiber cable with WDM
GE、FE
Connect device with ethernet port by RJ-45 cat5 cable.
RST
Press down reset button and keep1-5seconds to make the device
restart and recover from the factory default settings.
DC12V
Connect with power adapter.
CATV★
RF connector.
Power On/OFF
Power turn on/off.
Table 4 Interface description
Note:
1. With ★ tags, it is only for V2802GWT.
1.7 Software Parameters
Parameter
Name
Software Parameters
Software mode
Routing Mode
LAN
Support Loop Detection
Support Storm Control
Multicast
Support IGMPv1/v2
Support IGMP Snooping
QoS
Support SP and WRR
Support 802.1P
L3
Support DHCP/PPPOE
Support NAT
WiFi
IEEE802.11b/g/n,
Up to 300Mbps
Support Authentication : WEP/WAP-PSK(TKIP)/WAP2-PSK(AES)
Support Wireless channel selection
Management
Support WEB
Support Telnet
Table 5 Software Parameters