User Manual

-12-
1. From the main menu, tap "Setting" icon.
- A list of available setting categories is displayed.
2. Select the desired tap.
3. Select the desired setting category.
4. Change the settings as desired.
5. Tap
/ to save the new setting.
14. Change the Monitor's Settings
1. From the main menu, tap "Call scene" icon.
2. Select the desired tap.
- Divert call if no answer: If nobody answers the call in 30s when receives call
from door station, diverts the call to the smart phone.At this mode,the monitor
will always open the screen and show image from door station during
diverted, if the monitor answers the call at this time,diverted will conclude at
once.
- Divert call always: When receives call from door station, diverts the call to
smartphonedirectly.Atthismode,themonitorwillshuto󰀨thescreenafter
diverting successfully, but you can still use it in normal.
Note:
* If divert the call to smart phone via Sip sever, need to choose one.
* This function will perform immediately if selected,and the status bar on main menu
interface will show "
" icon.
13. Divert Calls
The calling from door station can be diverted to your smart phone. please note
that this function should be supported by SIP network.