User Manual

-17-
Tap “Server” to select firmware source, update firmware could come from as
below, tap on the source:
1. Cloud Server
Cloud server reqiures internet.
Server1[47.91.88.33]
Server2[47.106.104.38]
2. Local LAN server (IX -Builder)
Use IX-Builder PC software to creat a tempory local server for update.
Server3[192.168.2.60] #IX-Builder default IP
[Input IP address]
3. SD card
Copyupgradermwarebeforupgrade.
SD card
After tap “Download code” and input code, the code could get from v-tec support
team when device needed to update. After all, tap “Check” to load upgrade
information from source.
With tips on the screen as below:
Please insert SD card. #Some upgrade is oversize, reqiure SD card to storage rmware.
Mismatched. #Update rmware was founded, but is not suitalbe for this device.
Connect Erro. #Check networks.
No le. #Source has been inspected but there is no rmware need to
upgrade.
Otherwisethedevicewillgointoupgradeautomatically,pleasedonotpowero󰀨
during upgrade.